713-545-0655

A leaking water heater might or may definitely not seem to be a big problem. However, it doesn’t matter whether it is a significant leak or a little leak, either may lead to a whole lot of damage to ones house in the form of water damage. Many times people forget to realize that a tiny leak is frequently the indicator of something greater that could be beginning to take place, or will occur in the forseeable future. In the worse situation, that small leak may turn out to be a substantial flood if the water heater is close to completely giving out. At any rate, we are here to help with any sort of Spring Hot Water Heater Repair which might be required.

Besides water damage to ones house from a leaking storage tank, there can be health related issues with any type of water leak inside of a house. The dampness can cause mold or mildew growth. Individuals who endure allergies or asthma, it’s not a pleasurable scenario. The EPA says that some mold spores are hazardous and can lead to serious health concerns.

Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.  http://www.cdc.gov/mold/dampness_facts.htm

Wishing that an existing water leak will mend itself and merely go away is something which just does not materialize unfortunately. Plumbing leaks simply become worse with time. We have written a step-by-step checklist of actions to do during these predicaments.

Action Steps for Leaking Water HeatersLeaking Spring Water Heater

1. Initially be sure it really is the water heater that the leaking water is originating from.

When there is water around where the hot water heater is positioned, the leak might not always be coming from it. Examine any water pipes or other objects close to where the heater is located. Does one have some other home appliances close by that might create condensation? If ones heater is situated in a basement, this may very well be the case. It might sometimes be a furnace drain line too, or from a water softener.

Initially, clean up the water and find out if it returns any time before long by watching the spot periodically. Examine the water heater entirely to verify if any water is from any of the fittings, T&P valve, or drain valve. When it is thoroughly dry, continue to look at different things and locations close by.

When nothing else is wet in the general area, place paper towels on the ground in the spot that had been already wet. Examine every hour or so to be sure the paper towels remain dry. It will likely be much easier to see the paper towels getting wet then the ground. Following a day if absolutely nothing is wet once more, there should be absolutely nothing to be worried about, however still keep an eye on it for a couple days. If water is coming back, and there isn’t any other supply close by that it could possibly be from, we will carry on to the step two right here to diagnose the source of the leak.Breaker Box for Spring Water Heater

2. Switch the water heater’s power off

Ideally, it is common knowledge that water and electrical energy really do not go well with each other, therefore switch off the power for safety reasons.

For gas water heaters, there should be an on/off dial that should be placed to the off position. Keep the gas line on at this time still.

For electric heaters, go to the house’s circuit breaker box and shut off the breaker for the water heater.

3. Turn the water supply off

If one is sure that the leak is because of the hot water heater, and in the event it is somewhat big, switching the water off will eliminate the chance of water continuing to fill up the storage tank and leak in ones household. Again, with a serious leak via the heater, and if the disconnect valve cannot be reached or if it happens to be not working properly, go find and switch off the main disconnect valve for the whole home. If one remains unclear the leak is coming from the water heater, one may keep the water supply on for the present time.

Remember to be careful that water coming from the storage tank will be hot and might burn ones skin. Most heaters are going to be established to a temperature of at the very least 120° F, which can cause first degree burns on contact.

4. Identify the leak’s position

We do not need to have our Spring water heater potential customers to self diagnose their leaks ahead of contacting us, especially when there is a significant water leak condition taking place, but the more one can the quicker we can certainly help. The following is a list of potential explanations why the leak is occurring.

Leaking Water Connections
Look at to be certain the cold water inlet along with the hot water outlet connections are tight. They’re generally located at the top of the storage tank. Utilize a pipe wrench to test the connections. This is a straightforward fix in the event this is from where the leak is coming.

Leaking T&P Valve
Found on the side of the storage tank is the temperature and pressure relief valve. It will in addition have a drain pipe going down to the bottom from it. The valve controls the amount of pressure which builds up inside the storage tank. It will let water out when it must regulate the pressure. This valve could be the cause of the leak and may need replacing in the event that it doesn’t stay closed tight. Take a look to verify if any water is leaking via the valve. If water is coming from the valve when its in the sealed position, a new valve is going to be needed. This is certainly an important valve of the water heater, and one that really needs to operate effectively. However, replacing it is not so difficult and not expensive.

Danny Lipford suggests that:

Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. http://www.todayshomeowner.com/repair-leaking-water-heater-pressure-relief/

First, experiment to determine if there might be debris in the valve. Set a pail below the discharge tube and open the valve by pulling the handle on the valve. The water which is released may rinse the valve out and get rid of any kind of debris that could be in the path.Leaking Water Heater Drain Valve

Various other causes for a T&P valve leak could possibly be high water pressure with the local water system, or coming from a backflow preventer found around the water meter.

Leaking Drain Valve
Look at the drain valve in the bottoom of the heater. They are typically composed of plastic, and because of that, might break in time. Make certain that it is shut completely. If the drain valve needs replaced, it is a basic fix.

A drain valve leak might be brought on by dirt inside of the valve. Accomplish this first. Put a bucket underneath the valve and move the valve to open it. Emptying some water will probably flush out the debris. When after flushing, it continues to leak, it will need to be replaced.

In the event that the leak is coming from here and the valve keeps leaking due to the fact it requires replaced, try connecting a garden hose to it and run the hose outdoors. With some luck, that will eliminate the water leaking in the house.

Leak on the bottom of the tank
Whenever the tank leaks at the bottom, it usually means there is a considerable internal issue. On account of how the water storage tank is constructed, being wrapped inside of insulation and possessing an external skin, in cases where it is leaking, it is going to not be observable from the exterior. An interior water leak generally will be visible at the bottom of the storage tank. The older the storage tank is, the more likely it can be starting to rust and degrade. A rusting tank will be required to get changed.

5. Will I need a repair or replacement water heater?

Through our experience, we are able to accomplish a repair to take care of the leak, much more often then needing to replace ones heater. The sooner we are able to have a look at the predicament, the faster we can complete a repair previous to the damage getting even worse. We do highly advocate that any kind of repairs or replacements be carried out by a professional and not oneself, to guarantee they are accomplished properly and up to code. Frequently, manufacturer warranties will be voided in cases where a non-licensed person works on it.

Download a PDF of this post.